class RenderExampleController
Same name in other branches
- 4.0.x modules/render_example/src/Controller/RenderExampleController.php \Drupal\render_example\Controller\RenderExampleController
Provides module description page and examples of building render arrays.
Controllers that respond to a route should always return their content as a renderable array. See the arrays() method below as an example.
Hierarchy
- class \Drupal\Core\Controller\ControllerBase implements \Drupal\Core\DependencyInjection\ContainerInjectionInterface uses \Drupal\Core\Logger\LoggerChannelTrait, \Drupal\Core\Messenger\MessengerTrait, \Drupal\Core\Routing\RedirectDestinationTrait, \Drupal\Core\StringTranslation\StringTranslationTrait
- class \Drupal\render_example\Controller\RenderExampleController extends \Drupal\Core\Controller\ControllerBase implements \Drupal\Core\Security\TrustedCallbackInterface uses \Drupal\examples\Utility\DescriptionTemplateTrait
Expanded class hierarchy of RenderExampleController
Related topics
File
-
modules/
render_example/ src/ Controller/ RenderExampleController.php, line 24
Namespace
Drupal\render_example\ControllerView source
class RenderExampleController extends ControllerBase implements TrustedCallbackInterface {
use DescriptionTemplateTrait;
/**
* Constructs a new BlockController instance.
*
* @param \Drupal\Core\Session\AccountInterface $current_user
* The current user.
*/
public function __construct(AccountInterface $current_user) {
$this->currentUser = $current_user;
}
/**
* {@inheritdoc}
*/
public static function create(ContainerInterface $container) {
return new static($container->get('current_user'));
}
/**
* {@inheritdoc}
*/
protected function getModuleName() {
return 'render_example';
}
/**
* Examples of defining content using renderable arrays.
*
* Methods on a controller that are the target of a route should return a
* renderable array which contains any content to display for that route.
*/
public function arrays() {
// The core structure of the Render API is the render array, which is a
// hierarchical associative array containing data to be rendered and
// properties describing how the data should be rendered. Whenever a module
// needs to output content it should do so be defining that content as a
// renderable array. Below we'll look at some common examples of how render
// arrays can be used to define content.
$build = [];
// CSS and JavaScript libraries can be attached to elements in a renderable
// array. This way, if the element ends up being rendered and displayed you
// know for sure the CSS/JavaScript will also be included. But, if for
// some reason the element isn't ever rendered then Drupal can skip the
// unnecessary extra files.
//
// Learn more about attaching CSS and JavaScript libraries with the
// #attached property here:
// https://api.drupal.org/api/drupal/core%21lib%21Drupal%21Core%21Render%21theme.api.php/group/theme_render/#sec_attached
$build['#attached'] = [
'library' => [
'render_example/render-example.library',
],
];
// Renderable arrays have two kinds of key/value pairs: properties and
// children. Properties have keys starting with '#' and their values
// influence how the array will be translated to a string. Children are all
// elements whose keys do not start with a '#'. Their values should be
// renderable arrays themselves.
//
// This example defines a new element, 'simple', that contains two
// properties; '#markup' and '#description'. This is the quickest way to
// output a string of HTML.
$build['simple'] = [
'#markup' => '<p>' . $this->t('This page contains examples of various content elements described using render arrays. Read the code and comments in \\Drupal\\render_example\\Controller\\RenderExampleController::arrays() for more information.') . '</p>',
'#description' => $this->t('Example of using #markup'),
];
// Additional properties can be used to further define the content. In this
// case '#prefix' and '#suffix' are being used to provide strings to add
// before, and after, the main content. This is useful because now the tag
// being used to wrap the block of content can be easily changed without
// having to worry about the content. Or, the tag can easily be left out
// during rendering if for example the content is being output as JSON.
//
// There is a set of common properties that can be used for all elements in
// a render array. These are defined by
// \Drupal\Core\Render\Element\RenderElement. Most elements also have
// additional element type specific properties.
//
// Figuring out what additional properties are available requires first
// determining what sort of render element you're dealing with. Look for the
// presence of one of these properties to start:
// - #markup, or #plain_text: These are the simplest render arrays, and are
// used to display simple strings of text. In addition to the common set
// of properties available for all elements #markup elements can use the
// #allowed_tags property, an array of additional tags to allow when the
// HTML string is run through \Drupal\Component\Utility\Xss::filterAdmin()
// to strip out possible XSS vectors.
// - #theme: The presence of #theme indicates that the array contains data
// to be themed by a particular theme hook. The available properties will
// depend on the specific theme hook. See the example below for more about
// determining what properties to use.
// - #type: The presence of #type indicates that the array contains data and
// options for a particular type of "render element" (for example, 'form',
// 'textfield', 'submit', for HTML form element types; 'table', for a
// table with rows, columns, and headers). The additional properties will
// depend on the render element type, and are documented on the class that
// defines the element type.
//
$build['simple_extras'] = [
'#description' => $this->t('Example of using #prefix and #suffix'),
// Note the addition of '#type' => 'markup' in this example compared to
// the one above. Because #markup is such a commonly used element type you
// can exclude the '#type' => 'markup' line and it will be assumed
// automatically if the '#markup' property is present.
'#type' => 'markup',
'#markup' => '<p>' . $this->t('This one adds a prefix and suffix, which put a blockqoute tag around the item.') . '</p>',
'#prefix' => '<blockquote>',
'#suffix' => '</blockquote>',
];
// In addition to #markup, you can also use #plain_text to output, you
// guessed it, strings of plain text. This indicates that the array contains
// text which should be escaped before it is displayed.
$build['simple_text'] = [
'#plain_text' => '<em>This is escaped</em>',
'#description' => $this->t('Example of using #plain_text'),
];
// Using the '#theme' property for an element specifies that the array
// contains data to be themed by a particular theme hook. Essentially using
// a Twig template to generate the HTML for an element. Modules define theme
// hooks by implementing hook_theme(), which specifies the input "variables"
// used to provide data and options; if a hook_theme() implementation
// specifies variable 'separator', then in a render array, you would provide
// this data using the '#separator' property.
//
// @see hook_theme()
$build['theme_element'] = [
// The '#theme' property can be set to any valid theme hook. For more
// information about theme hooks, and to discover available theme hooks
// that you can use when creating render arrays see the documentation for
// hook_theme().
//
// Many of the most commonly used theme hooks are defined in
// drupal_common_theme().
'#theme' => 'item_list',
'#title' => $this->t('Example of using #theme'),
// The #items property is specific to the 'item_list' theme hook, and
// corresponds to the variable {{ items }} in the item-list.twig.html
// template file.
'#items' => [
$this->t('This is an item in the list'),
$this->t('This is some more text that we need in the list'),
],
];
// Using the '#type' property for an element specifies that the array
// contains data and options for a particular type of "render element".
// Render element types can be thought of as prepackaged render arrays that
// provide default values for a set of properties as well as code that
// will perform additional processing on the array before it is rendered.
//
// As an example take a look at the code in
// \Drupal\Core\Render\Element\Table::getInfo(). Notice that it is defining
// values for #theme, and #process? These values will be merged with
// whatever properties you define in your code.
//
// In addition, most render element types have type specific properties. A
// table for example has #header, and #rows properties. The easiest way to
// determine what element type specific properties exist is to read the
// documentation for the class that defines the element type. Don't forget
// that it will also inherit properties used by any class it is extending.
//
// There are two types of render element types:
// - Generic elements: Generic render element types encapsulate logic for
// generating HTML and attaching relevant CSS and JavaScript to the page.
// These include things like link, table, and drop button elements.
// - Form elements: Most of the render element types provided by core
// represent the various widgets you might use on a form. Text fields,
// password fields, and file upload buttons for example. These elements
// are intended to be used in conjunction with a form controller class
// and have additional properties such as `#required`, and
// `#element_validate`, related to their use as part of a form. For more
// on form elements check out the fapi_example module.
$build['table'] = [
// The value used for #type is the ID of the plugin that implements the
// element type you want to use. This can be inferred from the annotation
// for the element.
// You can also find a list of element types provided by Drupal core here
// https://api.drupal.org/api/drupal/elements.
'#type' => 'table',
'#caption' => $this->t('Our favorite colors.'),
'#header' => [
$this->t('Name'),
$this->t('Favorite color'),
],
'#rows' => [
[
$this->t('Amber'),
$this->t('teal'),
],
[
$this->t('Addi'),
$this->t('green'),
],
[
$this->t('Blake'),
$this->t('#063'),
],
[
$this->t('Enid'),
$this->t('indigo'),
],
[
$this->t('Joe'),
$this->t('green'),
],
],
'#description' => $this->t('Example of using #type.'),
];
// Render arrays can be nested any level deep. This allows you to group
// like things together. A great example of this is the $page array used in
// conjunction with the page.html.twig template. The top level contains all
// the regions, each of which contain the blocks placed in that region,
// which in turn contain their own content. In fact, when this array is
// ultimately displayed on a page it will be as part of the $page array.
$build['nested_example'] = [
'#description' => $this->t('Example of nesting elements'),
'#markup' => '<p>' . $this->t('Render arrays can contain any number of nested elements. During rendering, the innermost elements are rendered first, and their output is incorporated into the parent element.') . '</p>',
'nested_child_element' => [
// An un-ordered list of links.
// See /core/modules/system/templates/item-list.html.twig.
'#theme' => 'item_list',
'#title' => $this->t('Links'),
'#list_type' => 'ol',
'#items' => [
Link::fromTextAndUrl($this->t('Drupal'), Url::fromUri('https://www.drupal.org')),
Link::fromTextAndUrl($this->t('Not Drupal'), Url::fromUri('https://wordpress.org/')),
],
],
];
// Example of adding a link using the #link element type.
$build['nested_example']['another_nested_child'] = [
// See \Drupal\Core\Render\Element\Link.
'#type' => 'link',
'#title' => $this->t('A link to example.com'),
'#url' => Url::fromUri('https://example.com'),
];
// The #theme_wrappers property can be used to provide an array of theme
// hooks which provide the envelope or "wrapper" of a set of child elements.
// The theme function finds its element children (the sub-arrays) already
// rendered in '#children'.
$build['theme_wrappers demonstration'] = [
'#description' => $this->t('Example of using #theme_wrappers'),
'child1' => [
'#markup' => $this->t('Markup for child1'),
],
'child2' => [
'#markup' => $this->t('Markup for child2'),
],
'#theme_wrappers' => [
'render_example_add_div',
],
];
// Use the #access property to control who can see what content. If an
// element in an render array has its #access property set to FALSE it will
// be removed from the array before rendering. And thus not visible.
$build['access_example'] = [
'#description' => $this->t('Example of using #access to control visibility'),
'#markup' => $this->t('This text is only visible to authenticated users.'),
'#access' => $this->currentUser
->isAuthenticated(),
];
// Some properties define callbacks, which are callable functions or methods
// that are triggered at specific points during the rendering pipeline.
$build['pre_render_and_post_render'] = [
'#description' => $this->t('Example of using #pre_render and #post_render'),
'#markup' => '<div style="color:green">' . $this->t('markup for pre_render and post_render example') . '</div>',
// #pre_render callbacks are triggered early in the rendering process,
// they get access to the element in the array where the callback is
// named, and all of its children. They can be used to do things like
// conditionally alter the value of a property prior to the array being
// rendered to HTML.
'#pre_render' => [
static::class . '::preRenderAddSuffix',
],
// #post_render callbacks are triggered after the array has been rendered
// and can operate on the rendered HTML. They also have access to the
// original array for context.
'#post_render' => [
static::class . '::postRenderAddPrefix',
],
];
// Properties that contain callbacks can also reference methods on a class
// in addition to functions. See
// \Drupal\render_example\Controller\RenderExampleController::preRender()
// @todo This doesn't work, we need to fix it.
// https://www.drupal.org/project/examples/issues/2986435
// $build['#pre_render'] = [static::class, 'preRender'];.
// Caching is an important part of the Render API, converting an array to a
// string of HTML can be an expensive process, and therefore whenever
// possible the Render API will cache the results of rendering an array in
// order to improve performance.
//
// When defining a render array you should use the #cache property to define
// the cachability of an element.
$build['cache_demonstration'] = [
'#description' => $this->t('#cache demonstration'),
// This string contains information that is specific to the user who is
// currently viewing the page. We can cache it, and re-use the string any
// time the same user views the page again. However, if the user changes,
// or if the user changes their name, we need to expire the cached data
// and rebuild it so that it is accurate.
'#markup' => $this->t('Hello @name, welcome to the #cache example.', [
'@name' => $this->currentUser
->getAccountName(),
]),
// The #cache property is used to provide metadata about the element being
// cached, and the conditions under which it should be expired. This can
// be time based, or context based. You can read more about caching
// render arrays here
// https://www.drupal.org/docs/8/api/render-api/cacheability-of-render-arrays
'#cache' => [
// The "current user" is used above, which depends on the request, so
// we tell Drupal to vary by the 'user' cache context.
'contexts' => [
'user',
],
],
];
// A #lazy_builder callback can be used to build a highly dynamic section of
// a render array from scratch. This, combined with the use of placeholders,
// allows the renderer to cache some, but not all, portions of a render
// array. Without #lazy_builders, if any element in the render tree is
// uncacheable the whole tree would need to be re-rendered every time.
//
// The general rendering flow is as follows:
// - Check for cached version of output from previous rendering, if it
// exists replace any placeholders in the rendered output with their
// dynamic content as generated by the #lazy_builder callback, and return
// the resulting HTML.
// - If no cached version exists render the array to HTML, when an element
// that can be placeholdered is encountered insert a placeholder, cache
// the HTML after rendering for next time, replace the placeholders with
// their dynamic content, and return the resulting HTML.
//
// This is especially noticeable when used in conjunction with modules like
// Big Pipe which do rendering of a page in multiple passes vs. the default
// single flush renderer.
//
// See \Drupal\block\BlockViewBuilder::viewMultiple() for an example from
// core.
$build['lazy_builder'] = [
// Set the value of the #lazy_builder property to an array, the first key
// of the array is the method, service, or function, to call in oder to
// generate the dynamic data. The second argument is an array of any
// arguments to pass to the callback. Arguments can be only primitive
// types (string, bool, int, float, NULL).
'#lazy_builder' => [
static::class . '::lazyBuilder',
[
$this->currentUser
->id(),
'Y-m-d',
],
],
// #lazy_builder callbacks can be used in conjunction with
// #create_placeholder to tell the renderer that instead of simply calling
// the #lazy_builder code right away, to instead insert a placeholder and
// delay execution of the #lazy_builder code until it's needed.
//
// This is somewhat analogous to the way Drupal uses the PSR-4 autoloading
// standard to "lazy" load PHP files that contain the definition of a
// class only if, and when, that class is used.
//
// To force a element to use a placeholder set #create_placeholder to
// TRUE.
//
// Alternatively you could include #cache metadata (see above) and allow
// the Render API to use that metadata to automatically determine based on
// the existence of high-cardinality cache contexts in the subtree whether
// or not the element should use a placeholder.
'#create_placeholder' => TRUE,
];
// Example of the marquee element type defined by
// \Drupal\render_example\Element\Marquee.
$build['marquee'] = [
'#description' => $this->t('Example custom element type'),
'#type' => 'markup',
'marquee_element' => [
'#type' => 'marquee',
'#content' => $this->t('Hello world!'),
],
];
$output = [];
// We are going to create a new output render array that pairs each
// example with a set of helper render arrays. These are used to display
// the description as a title and the unrendered content alongside the
// examples.
foreach (Element::children($build) as $key) {
if (isset($build[$key])) {
$output[$key] = [
'#theme' => 'render_array',
'description' => [
'#type' => 'markup',
'#markup' => $build[$key]['#description'] ?? '',
],
'rendered' => $build[$key],
'unrendered' => [
'#type' => 'markup',
'#markup' => htmlentities(Variable::export($build[$key])),
],
];
}
}
foreach (Element::properties($build) as $key) {
$output[$key] = $build[$key];
}
return $output;
}
/**
* A #pre_render callback, expand array to include additional example info.
*
* This method is called during the process of rendering the array generated
* by \Drupal\render_example\Controller\RenderExampleController::arrays().
*
* This also demonstrates how a #pre_render callback could be used to expand
* a relatively simple array into multiple individual renderable elements
* based on application logic.
*
* @param array $element
* Pre render methods (and functions) get a single argument that is the
* render API array representing the element where the #pre_render property
* was defined, and all of it's children.
*
* @return array
* Pre render methods (and functions) should return the modified render
* array.
*/
public static function preRender(array $element) {
// For each first level child element lets add some additional helpful
// output. \Drupal\Core\Render\Element::children() is a utility method that
// allows you to quickly identify all children of a render array. That is
// those key/value pairs whose key does not start with a '#'.
foreach (Element::children($element) as $key) {
$child = $element[$key];
unset($element[$key]);
if (isset($child['#description'])) {
$element[$key] = [
// The value from the #description property will be used as a title
// for this element in the final output.
'description' => [
'#markup' => $child['#description'],
],
// Move the original element to 'rendered'. The rendering process is
// recursive so this will still be located, and rendered to HTML.
'rendered' => $child,
// Export the element definition as a string of text so we can display
// the array that was used to create the rendered output just below
// the output.
'unrendered' => [
'#markup' => htmlentities(Variable::export($child)),
],
'#theme' => 'render_array',
];
}
}
// Return our modified version of the original $element.
return $element;
}
/**
* Example #lazy_builder callback.
*
* Demonstrates the use of a #lazy_builder callback to build out a render
* array that can be substituted into the parent array wherever the cacheable
* placeholder exists.
*
* This method is called during the process of rendering the array generated
* by \Drupal\render_example\Controller\RenderExampleController::arrays().
*
* @param string $date_format
* Date format to use with \Drupal\Core\Datetime\DateFormatter::format().
*
* @return array
* A renderable array with content to replace the #lazy_builder placeholder.
*/
public static function lazyBuilder($date_format) {
$build = [
'lazy_builder_time' => [
'#markup' => '<p>' . \Drupal::translation()->translate('The current time is @time', [
'@time' => \Drupal::service('date.formatter')->format(\Drupal::time()->getRequestTime(), 'long'),
]) . '</p>',
],
];
return $build;
}
/**
* Example '#post_render' callback function.
*
* Post render callbacks are triggered after an element has been rendered to
* HTML and can act upon the final rendered string.
*
* This function is used as a post render callback in
* Drupal\render_example\Controller\RenderExampleController::arrays().
*
* @param string $markup
* The rendered element.
* @param array $element
* The element which was rendered (for reference)
*
* @return string
* Markup altered as necessary. In this case we add a little postscript.
*
* @see \Drupal\render_example\Controller\RenderExampleController::arrays()
*/
public static function postRenderAddPrefix($markup, array $element) {
$markup .= '<div style="color:blue">This markup was added after rendering by a #post_render callback.</div>';
return $markup;
}
/**
* Example '#pre_render' function.
*
* Pre render callbacks are triggered prior to rendering an element to HTML
* and are given the chance to manipulate the renderable array. Any changes
* they make will be reflected in the final rendered HTML.
*
* We need to wrap suffix in a Markup object.
* Otherwise, style attribute will be removed by Xss
*
* @see \Drupal\Component\Utility\Xss::filter()
*
* This function is used as a post render callback in
* \Drupal\render_example\Controller\RenderExampleController::arrays().
*
* @param array $element
* The element which will be rendered.
*
* @return array
* The altered element. In this case we add a #prefix to it.
*
* @see \Drupal\render_example\Controller\RenderExampleController::arrays()
*/
public static function preRenderAddSuffix(array $element) {
$element['#suffix'] = Markup::create('<div style="color:red">' . t('This #suffix was added by a #pre_render callback.') . '</div>');
return $element;
}
/**
* {@inheritDoc}
*/
public static function trustedCallbacks() {
return [
'postRenderAddPrefix',
'preRenderAddSuffix',
'lazyBuilder',
];
}
}
Members
Title Sort descending | Modifiers | Object type | Summary | Overriden Title | Overrides |
---|---|---|---|---|---|
ControllerBase::$configFactory | protected | property | The configuration factory. | ||
ControllerBase::$currentUser | protected | property | The current user service. | 3 | |
ControllerBase::$entityFormBuilder | protected | property | The entity form builder. | ||
ControllerBase::$entityTypeManager | protected | property | The entity type manager. | ||
ControllerBase::$formBuilder | protected | property | The form builder. | 1 | |
ControllerBase::$keyValue | protected | property | The key-value storage. | 1 | |
ControllerBase::$languageManager | protected | property | The language manager. | 1 | |
ControllerBase::$moduleHandler | protected | property | The module handler. | 1 | |
ControllerBase::$stateService | protected | property | The state service. | ||
ControllerBase::cache | protected | function | Returns the requested cache bin. | ||
ControllerBase::config | protected | function | Retrieves a configuration object. | ||
ControllerBase::container | private | function | Returns the service container. | ||
ControllerBase::currentUser | protected | function | Returns the current user. | 3 | |
ControllerBase::entityFormBuilder | protected | function | Retrieves the entity form builder. | ||
ControllerBase::entityTypeManager | protected | function | Retrieves the entity type manager. | ||
ControllerBase::formBuilder | protected | function | Returns the form builder service. | 1 | |
ControllerBase::keyValue | protected | function | Returns a key/value storage collection. | 1 | |
ControllerBase::languageManager | protected | function | Returns the language manager service. | 1 | |
ControllerBase::moduleHandler | protected | function | Returns the module handler. | 1 | |
ControllerBase::redirect | protected | function | Returns a redirect response object for the specified route. | ||
ControllerBase::state | protected | function | Returns the state storage service. | ||
DescriptionTemplateTrait::description | public | function | Generate a render array with our templated content. | ||
DescriptionTemplateTrait::getDescriptionTemplatePath | protected | function | Get full path to the template. | ||
DescriptionTemplateTrait::getDescriptionVariables | protected | function | Variables to act as context to the twig template file. | 1 | |
LoggerChannelTrait::$loggerFactory | protected | property | The logger channel factory service. | ||
LoggerChannelTrait::getLogger | protected | function | Gets the logger for a specific channel. | ||
LoggerChannelTrait::setLoggerFactory | public | function | Injects the logger channel factory. | ||
MessengerTrait::$messenger | protected | property | The messenger. | 17 | |
MessengerTrait::messenger | public | function | Gets the messenger. | 17 | |
MessengerTrait::setMessenger | public | function | Sets the messenger. | ||
RedirectDestinationTrait::$redirectDestination | protected | property | The redirect destination service. | 1 | |
RedirectDestinationTrait::getDestinationArray | protected | function | Prepares a 'destination' URL query parameter for use with \Drupal\Core\Url. | ||
RedirectDestinationTrait::getRedirectDestination | protected | function | Returns the redirect destination service. | ||
RedirectDestinationTrait::setRedirectDestination | public | function | Sets the redirect destination service. | ||
RenderExampleController::arrays | public | function | Examples of defining content using renderable arrays. | ||
RenderExampleController::create | public static | function | Instantiates a new instance of this class. | Overrides ControllerBase::create | |
RenderExampleController::getModuleName | protected | function | Name of our module. | Overrides DescriptionTemplateTrait::getModuleName | |
RenderExampleController::lazyBuilder | public static | function | Example #lazy_builder callback. | ||
RenderExampleController::postRenderAddPrefix | public static | function | Example '#post_render' callback function. | ||
RenderExampleController::preRender | public static | function | A #pre_render callback, expand array to include additional example info. | ||
RenderExampleController::preRenderAddSuffix | public static | function | Example '#pre_render' function. | ||
RenderExampleController::trustedCallbacks | public static | function | Lists the trusted callbacks provided by the implementing class. | Overrides TrustedCallbackInterface::trustedCallbacks | |
RenderExampleController::__construct | public | function | Constructs a new BlockController instance. | ||
StringTranslationTrait::$stringTranslation | protected | property | The string translation service. | 3 | |
StringTranslationTrait::formatPlural | protected | function | Formats a string containing a count of items. | ||
StringTranslationTrait::getNumberOfPlurals | protected | function | Returns the number of plurals supported by a given language. | ||
StringTranslationTrait::getStringTranslation | protected | function | Gets the string translation service. | ||
StringTranslationTrait::setStringTranslation | public | function | Sets the string translation service to use. | 2 | |
StringTranslationTrait::t | protected | function | Translates a string to the current language or to a given language. | ||
TrustedCallbackInterface::THROW_EXCEPTION | constant | Untrusted callbacks throw exceptions. | |||
TrustedCallbackInterface::TRIGGER_SILENCED_DEPRECATION | constant | Untrusted callbacks trigger silenced E_USER_DEPRECATION errors. | |||
TrustedCallbackInterface::TRIGGER_WARNING | constant | Untrusted callbacks trigger E_USER_WARNING errors. |