class BigPipe

class BigPipe {
    
    /**
     * The BigPipe placeholder replacements start signal.
     *
     * @var string
     */
    const START_SIGNAL = '<script type="application/vnd.drupal-ajax" data-big-pipe-event="start"></script>';
    
    /**
     * The BigPipe placeholder replacements stop signal.
     *
     * @var string
     */
    const STOP_SIGNAL = '<script type="application/vnd.drupal-ajax" data-big-pipe-event="stop"></script>';
    
    /**
     * The renderer.
     *
     * @var \Drupal\Core\Render\RendererInterface
     */
    protected $renderer;
    
    /**
     * The session.
     *
     * @var \Symfony\Component\HttpFoundation\Session\SessionInterface
     */
    protected $session;
    
    /**
     * The request stack.
     *
     * @var \Symfony\Component\HttpFoundation\RequestStack
     */
    protected $requestStack;
    
    /**
     * The HTTP kernel.
     *
     * @var \Symfony\Component\HttpKernel\HttpKernelInterface
     */
    protected $httpKernel;
    
    /**
     * The event dispatcher.
     *
     * @var \Symfony\Contracts\EventDispatcher\EventDispatcherInterface
     */
    protected $eventDispatcher;
    
    /**
     * The config factory.
     *
     * @var \Drupal\Core\Config\ConfigFactoryInterface
     */
    protected $configFactory;
    public function __construct(RendererInterface $renderer, SessionInterface $session, RequestStack $request_stack, HttpKernelInterface $http_kernel, EventDispatcherInterface $event_dispatcher, ConfigFactoryInterface $config_factory, ?MessengerInterface $messenger = NULL) {
        $this->renderer = $renderer;
        $this->session = $session;
        $this->requestStack = $request_stack;
        $this->httpKernel = $http_kernel;
        $this->eventDispatcher = $event_dispatcher;
        $this->configFactory = $config_factory;
        if (!isset($this->messenger)) {
            @trigger_error('Calling ' . __CLASS__ . '::_construct() without the $messenger argument is deprecated in drupal:10.3.0 and it will be required in drupal:11.0.0. See https://www.drupal.org/node/3343754', E_USER_DEPRECATED);
            $this->messenger = \Drupal::messenger();
        }
    }
    
    /**
     * Performs tasks after sending content (and rendering placeholders).
     */
    protected function performPostSendTasks() {
        // Close the session again.
        $this->session
            ->save();
    }
    
    /**
     * Sends a chunk.
     *
     * @param string|\Drupal\Core\Render\HtmlResponse $chunk
     *   The string or response to append. String if there's no cacheability
     *   metadata or attachments to merge.
     */
    protected function sendChunk($chunk) {
        assert(is_string($chunk) || $chunk instanceof HtmlResponse);
        if ($chunk instanceof HtmlResponse) {
            print $chunk->getContent();
        }
        else {
            print $chunk;
        }
        flush();
    }
    
    /**
     * Sends an HTML response in chunks using the BigPipe technique.
     *
     * @param \Drupal\big_pipe\Render\BigPipeResponse $response
     *   The BigPipe response to send.
     *
     * @internal
     *   This method should only be invoked by
     *   \Drupal\big_pipe\Render\BigPipeResponse, which is itself an internal
     *   class.
     */
    public function sendContent(BigPipeResponse $response) {
        $content = $response->getContent();
        $attachments = $response->getAttachments();
        // First, gather the BigPipe placeholders that must be replaced.
        $placeholders = $attachments['big_pipe_placeholders'] ?? [];
        $nojs_placeholders = $attachments['big_pipe_nojs_placeholders'] ?? [];
        // BigPipe sends responses using "Transfer-Encoding: chunked". To avoid
        // sending already-sent assets, it is necessary to track cumulative assets
        // from all previously rendered/sent chunks.
        // @see http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.41
        $cumulative_assets = AttachedAssets::createFromRenderArray([
            '#attached' => $attachments,
        ]);
        $cumulative_assets->setAlreadyLoadedLibraries($attachments['library']);
        // Find the closing </body> tag and get the strings before and after. But be
        // careful to use the latest occurrence of the string "</body>", to ensure
        // that strings in inline JavaScript or CDATA sections aren't used instead.
        $parts = explode('</body>', $content);
        $post_body = array_pop($parts);
        $pre_body = implode('', $parts);
        $this->sendPreBody($pre_body, $nojs_placeholders, $cumulative_assets);
        $this->sendPlaceholders($placeholders, $this->getPlaceholderOrder($pre_body, $placeholders), $cumulative_assets);
        $this->sendPostBody($post_body);
        $this->performPostSendTasks();
    }
    
    /**
     * Sends everything until just before </body>.
     *
     * @param string $pre_body
     *   The HTML response's content until the closing </body> tag.
     * @param array $no_js_placeholders
     *   The no-JS BigPipe placeholders.
     * @param \Drupal\Core\Asset\AttachedAssetsInterface $cumulative_assets
     *   The cumulative assets sent so far; to be updated while rendering no-JS
     *   BigPipe placeholders.
     */
    protected function sendPreBody($pre_body, array $no_js_placeholders, AttachedAssetsInterface $cumulative_assets) {
        // If there are no no-JS BigPipe placeholders, we can send the pre-</body>
        // part of the page immediately.
        if (empty($no_js_placeholders)) {
            $this->sendChunk($pre_body);
            return;
        }
        // Extract the scripts_bottom markup: the no-JS BigPipe placeholders that we
        // will render may attach additional asset libraries, and if so, it will be
        // necessary to re-render scripts_bottom.
        [
            $pre_scripts_bottom,
            $scripts_bottom,
            $post_scripts_bottom,
        ] = explode('<drupal-big-pipe-scripts-bottom-marker>', $pre_body, 3);
        $cumulative_assets_initial = clone $cumulative_assets;
        $this->sendNoJsPlaceholders($pre_scripts_bottom . $post_scripts_bottom, $no_js_placeholders, $cumulative_assets);
        // If additional asset libraries or drupalSettings were attached by any of
        // the placeholders, then we need to re-render scripts_bottom.
        if ($cumulative_assets_initial != $cumulative_assets) {
            // Create a new HtmlResponse. Ensure the CSS and (non-bottom) JS is sent
            // before the HTML they're associated with.
            // @see \Drupal\Core\Render\HtmlResponseSubscriber
            // @see template_preprocess_html()
            $js_bottom_placeholder = '<nojs-bigpipe-placeholder-scripts-bottom-placeholder token="' . Crypt::randomBytesBase64(55) . '">';
            $html_response = new HtmlResponse();
            $html_response->setContent([
                '#markup' => BigPipeMarkup::create($js_bottom_placeholder),
                '#attached' => [
                    'drupalSettings' => $cumulative_assets->getSettings(),
                    'library' => $cumulative_assets->getAlreadyLoadedLibraries(),
                    'html_response_attachment_placeholders' => [
                        'scripts_bottom' => $js_bottom_placeholder,
                    ],
                ],
            ]);
            $html_response->getCacheableMetadata()
                ->setCacheMaxAge(0);
            // Push a fake request with the asset libraries loaded so far and dispatch
            // KernelEvents::RESPONSE event. This results in the attachments for the
            // HTML response being processed by HtmlResponseAttachmentsProcessor and
            // hence the HTML to load the bottom JavaScript can be rendered.
            $fake_request = $this->requestStack
                ->getMainRequest()
                ->duplicate();
            $html_response = $this->filterEmbeddedResponse($fake_request, $html_response);
            $scripts_bottom = $html_response->getContent();
        }
        $this->sendChunk($scripts_bottom);
    }
    
    /**
     * Sends no-JS BigPipe placeholders' replacements as embedded HTML responses.
     *
     * @param string $html
     *   HTML markup.
     * @param array $no_js_placeholders
     *   Associative array; the no-JS BigPipe placeholders. Keys are the BigPipe
     *   selectors.
     * @param \Drupal\Core\Asset\AttachedAssetsInterface $cumulative_assets
     *   The cumulative assets sent so far; to be updated while rendering no-JS
     *   BigPipe placeholders.
     *
     * @throws \Exception
     *   If an exception is thrown during the rendering of a placeholder, it is
     *   caught to allow the other placeholders to still be replaced. But when
     *   error logging is configured to be verbose, the exception is rethrown to
     *   simplify debugging.
     */
    protected function sendNoJsPlaceholders($html, $no_js_placeholders, AttachedAssetsInterface $cumulative_assets) {
        // Split the HTML on every no-JS placeholder string.
        $placeholder_strings = array_keys($no_js_placeholders);
        $fragments = static::splitHtmlOnPlaceholders($html, $placeholder_strings);
        // Determine how many occurrences there are of each no-JS placeholder.
        $placeholder_occurrences = array_count_values(array_intersect($fragments, $placeholder_strings));
        // Set up a variable to store the content of placeholders that have multiple
        // occurrences.
        $multi_occurrence_placeholders_content = [];
        foreach ($fragments as $fragment) {
            // If the fragment isn't one of the no-JS placeholders, it is the HTML in
            // between placeholders and it must be printed & flushed immediately. The
            // rest of the logic in the loop handles the placeholders.
            if (!isset($no_js_placeholders[$fragment])) {
                $this->sendChunk($fragment);
                continue;
            }
            // If there are multiple occurrences of this particular placeholder, and
            // this is the second occurrence, we can skip all calculations and just
            // send the same content.
            if ($placeholder_occurrences[$fragment] > 1 && isset($multi_occurrence_placeholders_content[$fragment])) {
                $this->sendChunk($multi_occurrence_placeholders_content[$fragment]);
                continue;
            }
            $placeholder = $fragment;
            assert(isset($no_js_placeholders[$placeholder]));
            $token = Crypt::randomBytesBase64(55);
            // Render the placeholder, but include the cumulative settings assets, so
            // we can calculate the overall settings for the entire page.
            $placeholder_plus_cumulative_settings = [
                'placeholder' => $no_js_placeholders[$placeholder],
                'cumulative_settings_' . $token => [
                    '#attached' => [
                        'drupalSettings' => $cumulative_assets->getSettings(),
                    ],
                ],
            ];
            try {
                $elements = $this->renderPlaceholder($placeholder, $placeholder_plus_cumulative_settings);
            } catch (\Exception $e) {
                if ($this->configFactory
                    ->get('system.logging')
                    ->get('error_level') === ERROR_REPORTING_DISPLAY_VERBOSE) {
                    throw $e;
                }
                else {
                    trigger_error($e, E_USER_ERROR);
                    continue;
                }
            }
            // Create a new HtmlResponse. Ensure the CSS and (non-bottom) JS is sent
            // before the HTML they're associated with. In other words: ensure the
            // critical assets for this placeholder's markup are loaded first.
            // @see \Drupal\Core\Render\HtmlResponseSubscriber
            // @see template_preprocess_html()
            $css_placeholder = '<nojs-bigpipe-placeholder-styles-placeholder token="' . $token . '">';
            $js_placeholder = '<nojs-bigpipe-placeholder-scripts-placeholder token="' . $token . '">';
            $elements['#markup'] = BigPipeMarkup::create($css_placeholder . $js_placeholder . (string) $elements['#markup']);
            $elements['#attached']['html_response_attachment_placeholders']['styles'] = $css_placeholder;
            $elements['#attached']['html_response_attachment_placeholders']['scripts'] = $js_placeholder;
            $html_response = new HtmlResponse();
            $html_response->setContent($elements);
            $html_response->getCacheableMetadata()
                ->setCacheMaxAge(0);
            // Push a fake request with the asset libraries loaded so far and dispatch
            // KernelEvents::RESPONSE event. This results in the attachments for the
            // HTML response being processed by HtmlResponseAttachmentsProcessor and
            // hence:
            // - the HTML to load the CSS can be rendered.
            // - the HTML to load the JS (at the top) can be rendered.
            $fake_request = $this->requestStack
                ->getMainRequest()
                ->duplicate();
            $fake_request->query
                ->set('ajax_page_state', [
                'libraries' => implode(',', $cumulative_assets->getAlreadyLoadedLibraries()),
            ]);
            try {
                $html_response = $this->filterEmbeddedResponse($fake_request, $html_response);
            } catch (\Exception $e) {
                if ($this->configFactory
                    ->get('system.logging')
                    ->get('error_level') === ERROR_REPORTING_DISPLAY_VERBOSE) {
                    throw $e;
                }
                else {
                    trigger_error($e, E_USER_ERROR);
                    continue;
                }
            }
            // Send this embedded HTML response.
            $this->sendChunk($html_response);
            // Another placeholder was rendered and sent, track the set of asset
            // libraries sent so far. Any new settings also need to be tracked, so
            // they can be sent in ::sendPreBody().
            $cumulative_assets->setAlreadyLoadedLibraries(array_merge($cumulative_assets->getAlreadyLoadedLibraries(), $html_response->getAttachments()['library']));
            $cumulative_assets->setSettings($html_response->getAttachments()['drupalSettings']);
            // If there are multiple occurrences of this particular placeholder, track
            // the content that was sent, so we can skip all calculations for the next
            // occurrence.
            if ($placeholder_occurrences[$fragment] > 1) {
                $multi_occurrence_placeholders_content[$fragment] = $html_response->getContent();
            }
        }
    }
    
    /**
     * Sends BigPipe placeholders' replacements as embedded AJAX responses.
     *
     * @param array $placeholders
     *   Associative array; the BigPipe placeholders. Keys are the BigPipe
     *   placeholder IDs.
     * @param array $placeholder_order
     *   Indexed array; the order in which the BigPipe placeholders must be sent.
     *   Values are the BigPipe placeholder IDs. (These values correspond to keys
     *   in $placeholders.)
     * @param \Drupal\Core\Asset\AttachedAssetsInterface $cumulative_assets
     *   The cumulative assets sent so far; to be updated while rendering BigPipe
     *   placeholders.
     *
     * @throws \Exception
     *   If an exception is thrown during the rendering of a placeholder, it is
     *   caught to allow the other placeholders to still be replaced. But when
     *   error logging is configured to be verbose, the exception is rethrown to
     *   simplify debugging.
     */
    protected function sendPlaceholders(array $placeholders, array $placeholder_order, AttachedAssetsInterface $cumulative_assets) {
        // Return early if there are no BigPipe placeholders to send.
        if (empty($placeholders)) {
            return;
        }
        // Send the start signal.
        $this->sendChunk("\n" . static::START_SIGNAL . "\n");
        // A BigPipe response consists of an HTML response plus multiple embedded
        // AJAX responses. To process the attachments of those AJAX responses, we
        // need a fake request that is identical to the main request, but with
        // one change: it must have the right Accept header, otherwise the work-
        // around for a bug in IE9 will cause not JSON, but <textarea>-wrapped JSON
        // to be returned.
        // @see \Drupal\Core\EventSubscriber\AjaxResponseSubscriber::onResponse()
        $fake_request = $this->requestStack
            ->getMainRequest()
            ->duplicate();
        $fake_request->headers
            ->set('Accept', 'application/vnd.drupal-ajax');
        // Create a Fiber for each placeholder.
        $fibers = [];
        foreach ($placeholder_order as $placeholder_id) {
            if (!isset($placeholders[$placeholder_id])) {
                continue;
            }
            $placeholder_render_array = $placeholders[$placeholder_id];
            $fibers[$placeholder_id] = new \Fiber(fn() => $this->renderPlaceholder($placeholder_id, $placeholder_render_array));
        }
        $iterations = 0;
        while (count($fibers) > 0) {
            foreach ($fibers as $placeholder_id => $fiber) {
                try {
                    if (!$fiber->isStarted()) {
                        $fiber->start();
                    }
                    elseif ($fiber->isSuspended()) {
                        $fiber->resume();
                    }
                    // If the Fiber hasn't terminated by this point, move onto the next
                    // placeholder, we'll resume this Fiber again when we get back here.
                    if (!$fiber->isTerminated()) {
                        // If we've gone through the placeholders once already, and they're
                        // still not finished, then start to allow code higher up the stack
                        // to get on with something else.
                        if ($iterations) {
                            $fiber = \Fiber::getCurrent();
                            if ($fiber !== NULL) {
                                $fiber->suspend();
                            }
                        }
                        continue;
                    }
                    $elements = $fiber->getReturn();
                    unset($fibers[$placeholder_id]);
                    // Create a new AjaxResponse.
                    $ajax_response = new AjaxResponse();
                    // JavaScript's querySelector automatically decodes HTML entities in
                    // attributes, so we must decode the entities of the current BigPipe
                    // placeholder ID (which has HTML entities encoded since we use it to
                    // find the placeholders).
                    $big_pipe_js_placeholder_id = Html::decodeEntities($placeholder_id);
                    $ajax_response->addCommand(new ReplaceCommand(sprintf('[data-big-pipe-placeholder-id="%s"]', $big_pipe_js_placeholder_id), $elements['#markup']));
                    $ajax_response->setAttachments($elements['#attached']);
                    // Delete all messages that were generated during the rendering of this
                    // placeholder, to render them in a BigPipe-optimized way.
                    $messages = $this->messenger
                        ->deleteAll();
                    foreach ($messages as $type => $type_messages) {
                        foreach ($type_messages as $message) {
                            $ajax_response->addCommand(new MessageCommand($message, NULL, [
                                'type' => $type,
                            ], FALSE));
                        }
                    }
                    // Push a fake request with the asset libraries loaded so far and
                    // dispatch KernelEvents::RESPONSE event. This results in the
                    // attachments for the AJAX response being processed by
                    // AjaxResponseAttachmentsProcessor and hence:
                    // - the necessary AJAX commands to load the necessary missing asset
                    //   libraries and updated AJAX page state are added to the AJAX
                    //   response
                    // - the attachments associated with the response are finalized,
                    // which allows us to track the total set of asset libraries sent in
                    // the initial HTML response plus all embedded AJAX responses sent so
                    // far.
                    $fake_request->query
                        ->set('ajax_page_state', [
                        'libraries' => implode(',', $cumulative_assets->getAlreadyLoadedLibraries()),
                    ] + $cumulative_assets->getSettings()['ajaxPageState']);
                    $ajax_response = $this->filterEmbeddedResponse($fake_request, $ajax_response);
                    // Send this embedded AJAX response.
                    $json = $ajax_response->getContent();
                    $output = <<<EOF
<script type="application/vnd.drupal-ajax" data-big-pipe-replacement-for-placeholder-with-id="{<span class="php-variable">$placeholder_id</span>}">
{<span class="php-variable">$json</span>}
</script>
EOF;
                    $this->sendChunk($output);
                    // Another placeholder was rendered and sent, track the set of asset
                    // libraries sent so far. Any new settings are already sent; we
                    // don't need to track those.
                    if (isset($ajax_response->getAttachments()['drupalSettings']['ajaxPageState']['libraries'])) {
                        $cumulative_assets->setAlreadyLoadedLibraries(explode(',', $ajax_response->getAttachments()['drupalSettings']['ajaxPageState']['libraries']));
                    }
                } catch (\Exception $e) {
                    unset($fibers[$placeholder_id]);
                    if ($this->configFactory
                        ->get('system.logging')
                        ->get('error_level') === ERROR_REPORTING_DISPLAY_VERBOSE) {
                        throw $e;
                    }
                    else {
                        trigger_error($e, E_USER_ERROR);
                    }
                }
            }
            $iterations++;
        }
        // Send the stop signal.
        $this->sendChunk("\n" . static::STOP_SIGNAL . "\n");
    }
    
    /**
     * Filters the given embedded response, using the cumulative AJAX page state.
     *
     * @param \Symfony\Component\HttpFoundation\Request $fake_request
     *   A fake subrequest that contains the cumulative AJAX page state of the
     *   HTML document and all preceding Embedded HTML or AJAX responses.
     * @param \Symfony\Component\HttpFoundation\Response|\Drupal\Core\Render\HtmlResponse|\Drupal\Core\Ajax\AjaxResponse $embedded_response
     *   Either an HTML response or an AJAX response that will be embedded in the
     *   overall HTML response.
     *
     * @return \Symfony\Component\HttpFoundation\Response
     *   The filtered response, which will load only the assets that $fake_request
     *   did not indicate to already have been loaded, plus the updated cumulative
     *   AJAX page state.
     */
    protected function filterEmbeddedResponse(Request $fake_request, Response $embedded_response) {
        assert($embedded_response instanceof HtmlResponse || $embedded_response instanceof AjaxResponse);
        return $this->filterResponse($fake_request, HttpKernelInterface::SUB_REQUEST, $embedded_response);
    }
    
    /**
     * Filters the given response.
     *
     * @param \Symfony\Component\HttpFoundation\Request $request
     *   The request for which a response is being sent.
     * @param int $request_type
     *   The request type. Can either be
     *   \Symfony\Component\HttpKernel\HttpKernelInterface::MAIN_REQUEST or
     *   \Symfony\Component\HttpKernel\HttpKernelInterface::SUB_REQUEST.
     * @param \Symfony\Component\HttpFoundation\Response $response
     *   The response to filter.
     *
     * @return \Symfony\Component\HttpFoundation\Response
     *   The filtered response.
     */
    protected function filterResponse(Request $request, $request_type, Response $response) {
        assert($request_type === HttpKernelInterface::MAIN_REQUEST || $request_type === HttpKernelInterface::SUB_REQUEST);
        $this->requestStack
            ->push($request);
        $event = new ResponseEvent($this->httpKernel, $request, $request_type, $response);
        $this->eventDispatcher
            ->dispatch($event, KernelEvents::RESPONSE);
        $filtered_response = $event->getResponse();
        $this->requestStack
            ->pop();
        return $filtered_response;
    }
    
    /**
     * Sends </body> and everything after it.
     *
     * @param string $post_body
     *   The HTML response's content after the closing </body> tag.
     */
    protected function sendPostBody($post_body) {
        $this->sendChunk('</body>' . $post_body);
    }
    
    /**
     * Renders a placeholder, and just that placeholder.
     *
     * BigPipe renders placeholders independently of the rest of the content, so
     * it needs to be able to render placeholders by themselves.
     *
     * @param string $placeholder
     *   The placeholder to render.
     * @param array $placeholder_render_array
     *   The render array associated with that placeholder.
     *
     * @return array
     *   The render array representing the rendered placeholder.
     *
     * @see \Drupal\Core\Render\RendererInterface::renderPlaceholder()
     */
    protected function renderPlaceholder($placeholder, array $placeholder_render_array) {
        $elements = [
            '#markup' => $placeholder,
            '#attached' => [
                'placeholders' => [
                    $placeholder => $placeholder_render_array,
                ],
            ],
        ];
        return $this->renderer
            ->renderPlaceholder($placeholder, $elements);
    }
    
    /**
     * Gets the BigPipe placeholder order.
     *
     * Determines the order in which BigPipe placeholders are executed. It is
     * safe to use a regular expression here as the HTML is statically created in
     * \Drupal\big_pipe\Render\Placeholder\BigPipeStrategy::createBigPipeJsPlaceholder().
     *
     * @param string $html
     *   HTML markup.
     * @param array $placeholders
     *   Associative array; the BigPipe placeholders. Keys are the BigPipe
     *   placeholder IDs.
     *
     * @return array
     *   Indexed array; the order in which the BigPipe placeholders will start
     *   execution. Placeholders begin execution in DOM order. Note that due to
     *   the Fibers implementation of BigPipe, although placeholders will start
     *   executing in DOM order, they may finish and render in any order. Values
     *   are the BigPipe placeholder IDs. Note that only unique placeholders are
     *   kept: if the same placeholder occurs multiple times, we only keep the
     *   first occurrence.
     */
    protected function getPlaceholderOrder($html, $placeholders) {
        if (preg_match_all('/<span data-big-pipe-placeholder-id="([^"]*)">/', $html, $matches)) {
            return array_unique($matches[1]);
        }
        return [];
    }
    
    /**
     * Splits an HTML string into fragments.
     *
     * Creates an array of HTML fragments, separated by placeholders. The result
     * includes the placeholders themselves. The original order is respected.
     *
     * @param string $html_string
     *   The HTML to split.
     * @param string[] $html_placeholders
     *   The HTML placeholders to split on.
     *
     * @return string[]
     *   The resulting HTML fragments.
     */
    private static function splitHtmlOnPlaceholders($html_string, array $html_placeholders) {
        $prepare_for_preg_split = function ($placeholder_string) {
            return '(' . preg_quote($placeholder_string, '/') . ')';
        };
        $preg_placeholder_strings = array_map($prepare_for_preg_split, $html_placeholders);
        $pattern = '/' . implode('|', $preg_placeholder_strings) . '/';
        if (strlen($pattern) < 31000) {
            // Only small (<31K characters) patterns can be handled by preg_split().
            $flags = PREG_SPLIT_NO_EMPTY | PREG_SPLIT_DELIM_CAPTURE;
            $result = preg_split($pattern, $html_string, 0, $flags);
        }
        else {
            // For large amounts of placeholders we use a simpler but slower approach.
            foreach ($html_placeholders as $placeholder) {
                $html_string = str_replace($placeholder, "\x1f" . $placeholder . "\x1f", $html_string);
            }
            $result = array_filter(explode("\x1f", $html_string));
        }
        return $result;
    }

}